News Article

ErP Directive For Warm Air Heaters 2018

Written By


19 October 2017

Do you want to be kept up to date with industry news like this?

Join our mailing list


With the new  ErP Directive For Warm Air Heaters 2018 looming, we at Powrmatic have compiled a series of helpful questions that will help you understand what the new ERP directive is, and how it will affect warm air heaters in 2018 and beyond.  Be sure to look for our ErP logo on all compliant product brochures as we move into 2018.

1: What is the ErP Directive for Warm Air Heaters 2018?

The Energy Related Product Directive 2009/125/EC (ErP for short) is a European Council Regulation which implements a series of measures for reducing greenhouse gas emissions. Warm air heaters are covered by the scope of Lot 21 of the Directive.


2: Can I download a copy of the ErP Directive for Warm Air Heaters 2018?

Yes to download the ErP Directive for Warm Air Heaters 2018 click on the link below:

Click Here


3: Does it affect the heaters I purchase, install or specify?

Yes, where those heaters are specifically applied to provide thermal comfort for human beings.


4: Are there applications where the ErP Directive for Warm Air Heaters 2018 does not apply?

Yes, if the heaters are used for the applications below, technically the ErP regulations do not apply. However installers, specifiers and end users should consider the benefits of applying compliant heaters as they may well offer benefits.

The applications where ErP Directive for Warm Air Heaters 2018 doesn’t apply are:

  • Door curtains
  • Agricultural heating (ie poultry houses)
  • Horticultural heating (ie glasshouses)
  • Process heaters/dryers
  • Frost protection of perishable products


5: Does the regulation apply to air handling units as well as air heaters?

Yes, this is specifically covered within the Directive.


6: Does the regulation cover oil, gas, LPG and bio fuels?



7: Are gas fired radiant heaters covered?

Yes, however they are covered under Lot 20 of the Directive, see separate bulletin (coming soon).


8: What does the Erp Directive For Warm Air Heaters require?

The implementation and requirements of the Directive in respect of warm air heaters become effective as from:-

  1st January 2018;

  • From this date all warm air heaters which are used to provide thermal comfort for human beings must achieve a seasonal efficiency of more than 72%.

  And from the 26th September 2018;

Additionally, NOx emissions must not exceed:-

  • For gas fired warm air heaters  100 mg/kWh (gross)
  • For oil fired warm air heaters 180 mg/kWh (gross)

There are further changes due from the 1st January 2021, these will be covered by a  separate bulletin closer to the implementation date.


9: What do you mean by seasonal efficiency?

 The seasonal efficiency calculation required under the Directive takes into account  the thermal efficiency at both full and part load conditions as well as airflow,  temperature rise across the heat exchanger and power consumption.


10: Why does the efficiency threshold seem lower than those currently achieved?

 This is because the European Council have chosen to use gross calorific values  rather than the nett calorific values that are currently used to determine thermal  efficiency.


11: So are the heaters just as efficient as they used to be?

Yes, and in most cases more so.


12: How will the heaters change on the 1st January 2018?

In the short term the heater products that are familiar to you will remain largely  unchanged. The key differences are as follows:-

If heaters are to be used for providing comfort for human beings then from 1st January 2018 both suspended and cabinet heaters will be configured to operate with high/low output as standard. This applies principally to the following ranges:-

  • NVx
  • CPx/CPxEA
  • OUH
  • HEM (Heat Exchange Modules)

If heaters are to be used in ‘non-comfort’ heating applications (see question 4) then it may be possible to specify product in on/off configuration where such formats are available.


13: Will the above heaters still be available in modulating configuration as well as high low?

Yes, and in modulating format all will be compliant.


14: Will all warm air products change?

No, the following products are already compliant and as such won’t change:-

  • NVS
  • CP+ (Already high/low as standard, modulating as an option)
  • TE  (Already high/low as standard, modulating as an option)


15: Are there any on/off heaters that are compliant?

Yes, our NVS condensing gas unit heater is compliant in on/off, high/low and modulating configuration.


16: What happens if I order heaters in December 2017 for delivery in January 2018 or after?

Current on/off heaters ordered immediately prior to the changeover date (1st January 2018) and for delivery shortly after the changeover date can be considered to be in the supply chain and can be delivered in this format.


17: There are further changes in September 2018, how will these affect the heaters?

On September 26th lower NOx levels will apply to heaters which are to be used to provide comfort heating. All Powrmatic heaters will be compliant and, essentially, the heaters will remain familiar to you.


To be informed on the latest news regarding the ErP Directive for warm air heaters and radiant heaters for 2018, sign up to our newsletter below.

Share this article

Back to News